0800 FASTLANE
0800 FASTLANE
Part Number: 101-0001Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatib...
View full detailsPart Number: 101-0164This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged application...
View full detailsPart Number: 101-0106Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion conne...
View full detailsPart Number: 101-0226The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters...
View full detailsPart Number: 101-0045Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread
Part Number: 101-0199Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP t...
View full detailsPart Number: 135-1000Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and ...
View full detailsPart Number: 101-00062.5 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom h...
View full detailsPart Number: 101-00052.5 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom h...
View full detailsPart Number: 101-0225Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes F...
View full detailsPart Number: 101-0211Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6Pin round CAN connector on the front of t...
View full detailsPart Number: 101-0015More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to...
View full detailsPart Number: 101-0054Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knockl...
View full detailsPart Number: 101-0103Small Diameter Trigger wheel – Medium and Large sizes also available. 24 tooth 150mm diameter 40mm centre
Part Number: 101-0076Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread
Part Number: 101-0320Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitab...
View full detailsPart Number: 101-0080Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and Wiring Up to 150 PSI above at...
View full detailsPart Number: 101-0034Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of eth...
View full detailsPart Number: 101-0163 The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged a...
View full detailsPart Number: 110-0005
Part Number: 100-0113
Part Number: 101-00030.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’...
View full detailsPart Number: 100-0170Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length. Features: Sample lap and split times as well as speed,...
View full detailsPart Number: 101-0286Includes housings, wedgelocks and pins. 7.5A
Part Number: 101-0239Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately). Custom button inserts and configurable RGB indic...
View full detailsPart Number: 101-0020Field Installable CAN Plug - Can be used to wire in to the 6 pin CAN port on Link G4/G4+/G4X ECUs that have a round 6 pin CAN ...
View full detailsPart Number: 101-0330 Rugged 15 button CAN Keypad with interchangeable 15mm inserts (sold separately). Two rotary encoders with 16 Blue indicator L...
View full detailsPart Number: 101-0332 RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing experience to the next level. Wit...
View full detailsPart Number: 100-0177 Link MXT Strada 10” dash, powered by AIM.The Link MXT Strada Race edition is a full colour, 10-inch dash display with 10 RGB ...
View full detailsPart Number: 100-0176 Link MXT Strada 10” dash, powered by AIM.The Link MXT Strada Street edition is a full colour, 10-inch dash display legal for ...
View full detailsPart Number: 101-0116This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fur...
View full detailsPart Number: 125-1000Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible wit...
View full detailsPart Number: 101-0117Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.Features: O2 Bung and Plug
Part Number: 114-1000KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will re...
View full detailsPart Number: 105-1000The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/f...
View full detailsPart Number: 101-0053Donut style 8mm hole Includes plug and pin kit